Supported Web Browsers
Supported:
-
Chrome 84 and later
-
Internet Explorer 11
-
Firefox 84 and later
-
Edge 88 and later
-
Safari 13.0 and later
FoodLogiQ Mobile Application
Supported Operating Systems:
- Apple iOS 10.0 or later
Android 5.1 (Lollipop) or later
Ruggedized Hardware
Supported Devices:
- Motorola TC700H (Zebra) with Android 4.4.3 or later
- Tested with Datawedge versions 4.0.5 and 3.1.24
- Motorola TC52 (Zebra)
- Motorola TC55 (Zebra) with Android 4.1 (Jelly Bean)
- Will require datawedge setup. See this link for Manual Datawedge Setup
Desired Devices:
- Honeywell CN51
Scanners
Our recommendation is if you want to use a mobile device with a laser to scan barcodes, currently the only supported devices are Zebra TC70/TC75/TC52. You can use the camera to scan barcodes on any iOS or Android device when submitting events within the FoodLogiQ Connect app. Here's a link to an article on our Knowledge Base that describes the devices that we support: https://knowledge.foodlogiq.com/hc/en-us/articles/115002712613
Printers
Regarding printers and labels, you may want to start with your current provider. Sometimes, it's just a matter of adding the GS1-128 to your program of labels you are able to print.
FoodLogiQ also has a solution where you can print sheets of GS1-128 labels. Here is an article from our Knowledge Base with instructions: https://knowledge.foodlogiq.com/hc/en-us/articles/115002974008
Finally, GS1 US has a directory for finding solution providers. (GS1 US Solution Provider Finder). They have a number of certified partners who can provide you with the software and hardware to create and print labels.
Troubleshooting
- If the scanner beeps, but no data is being populated in the application.
For Motorola devices, it is likely that the FoodLogiQ Connect application was unable to programmatically create the appropriate datawedge profile. Please follow the instructions in this link to setup datawedge manually.
Comments
0 comments
Article is closed for comments.